| Brand | Tineco |
| Color | Grey |
| Cordless | ✔ |
| iLoop Sensor | ✔ |
| Enhanced Dual Side Edge Clean | ✔ |
| Running Time | Up to 40 minutes |
| Water Tank Cap | 0.72L |
| Screen Display | LED |
What is the suction power of the floor washer when sucking up water and debris?
Suction power for the floor washer ranges from 10 AW to 18AW (Air Watts) depending on how dirty the floor is.
How do you start self-cleaning mode?
To start the Steam's self-cleaning mode, please follow the following steps: Place the floor washer on the storage tray. Empty the Dirty Water Tank. The Clean Water Tank should be at least 40% full of water. Plug in the appliance and press self-cleaning button at the top of the handle to start the brush roll self-cleaning mode. The floor washer will automatically shut off once finished. The entire self-cleaning process takes about 100 seconds.
How noisy is the floor washer?
The floor washer produces up to 80dBA of sound.
What kind of floors it can be used on?
The Steam can be used on non-carpeted floor such as vinyl, tile, and sealed wood floors.
Is the APP collect personal information?Is any personal information shared?
Our APP does not save personal information. Location information can be read , but personal information is never shared or leaked.
If my device or account is deleted, can I still connect to the device?
No. You will need to reconnect the device.
Does the hair dryer connect to the internet?
Yes, MODA ONE was designed to connect to the internet and work with the Tineco app to enhance your product experience and customize your drying preferences. Please follow the instruction manual and app instructions to connect to your network.
What is the status of the red LED ring flashing?
A red flashing light is an error indicator that can be caused by a motor malfunction or overheating. 1.Make sure to turn off and unplug your devide. 2. Check that nothing is covering or blocking the air intake at the back of the dryer 3. Twist the air intake cover counter clockwise to remove the cover and make sure any debris or hair is cleared 4. Allow the dryer to cool down, plug it back in and restart the dryer 5. If the product is still not working, please contact Tineco support for further assistance
How Do I Connect to the App?
1.Download the Tineco APP 2.Connect the hair dryer to the power supply 3. Turn on the dryer 4. Press the ""Cool"" button and the ""Max / Auto""button at the same time. The blue LED light ring should begin to flash, indicating that the hair dryer is trying to connect to your phone. 5. Open the Tineco app and select add device and follow the steps to configure your MODA ONE hair dryer
How do I know when the Clean Water Tank (CWT) needs to be refilled?
You may find the CWT empty indicator light blinking and a voice prompt reminding you to refill it.
Why does the Tineco i6 Stretch battery drain quickly?
Runtime depends on suction mode and floor conditions. Higher power settings consume more battery.
Why does the Tineco i6 Stretch struggle with larger debris?
The slim brush head is optimized for daily hard-floor cleaning rather than oversized debris pickup.
Why does the Tineco i6 Stretch leave floors damp?
Wet-dry vacuums intentionally leave slight moisture to improve cleaning performance, and floors usually dry quickly.
Why does the Tineco i6 Stretch roller smell after use?
The roller and dirty water tank should be cleaned and dried after every use to prevent odor buildup.
Why does the Tineco i6 Stretch feel difficult to control initially?
The self-propelled system may require a short adjustment period for new users.
