| Brand | Tineco |
| Surface Recommendation | Hard Floor |
| Included Components | Brush Roller |
| Color | Black |
| Power Source | Battery Powered |
| Voltage | 25.2 Volts |
| Capacity | 0.88 Liters |
| Style | Modern |
| Package Dimensions | 30 x 12.5 x 12.36 inches |
| Item Weight | 7.8 kg |
| Screen Display | LED |
| Clean Water Tank Cap | 0.88L |
| Dirty Water Tank Cap | 0.7L |
| Running Time | Up to 80 minutes |
What is the difference between Floor One and other floor wash cleaners?
Tineco Floor One is the smart floor washer which automatically detects how dirty the floor is and applies the appropriate amount of detergent, water, roller pressure and suction power to ensure the perfect hard floor clean every time.
Do you have to vacuum an area first before using the Floor One?
There is no need to vacuum an area first because the Floor One can vacuum and wash the floor simultaneously.
What kind of floors it can be used on?
The Floor One can be used on non-carpeted floor such as vinyl, tile, and sealed wood floors.
Can this be used for dry vacuuming? Can you just vacuum without using water?
The Floor one can‘t be used without water for dry vacuuming. It will cause damage to the brush roller. Ideally you should use the Floor One with solution and water to automatically adjust solution and clean water flow to ensure an ideal cleaning result.
Can you use a third party cleaning solution?
It is not recommended to use a third party cleaning solution because the floor washer is designed to be used with the Tineco Cleaning Solution to optimize the amount of bubbles that are produced with cleaning solutions. Third party solutions can cause an over abundance of bubbles when cleaning that could fill up the Dirty Water Tank within minutes of use.
How noisy is the floor washer?
The floor washer produces up to 78dBA of sound.
How do you start self-cleaning mode?
To start the Floor One's self-cleaning mode, please follow the following steps: Always keep the floor washer plugged in. Place the floor washer on the charging dock. Empty the Dirty Water Tank. The Clean Water Tank should be at least 1/3 full of water. Press self-cleaning button at the top of the handle to evoke self cleaning, press it again to choose either quick self-cleaning or Super self cleaning, and 3 seconds later, the chosen brush roll self-cleaning mode will start. Afterwards, the floor washer will automatically shut off once finished. The entire self-cleaning process takes about 120 seconds (quick mode) / 360 seconds (super mode).
How often I need to clean the brush roll?
We advise to clean the brush roll after each use.
What is the suction power of the floor washer when sucking up water and debris?
Suction power for the floor washer ranges from 15-30AW (Air Watts) depending on how dirty the floor is.
How long can the floor washer run on a full charge?
The Floor One has a Lithium-ion 25.2V 4000mAh battery that allows it to run 30-40 minutes depending on how often the floor washer is running on max power.
How much time does the Floor One take to be fully charged?
The Floor One takes around 4.5 hours to charge to full.
What is the voltage of the charger? Can you use a different charger?
The Tineco Floor One uses 100-240V in its charger. We do not recommend using a different charger as that may not be compatible with the battery.
What are the Clean Water Tank and Dirty Water Tank capacities?
The Clean Water Tank capacity is 0.85L. The Dirty Water Tank capacity is 0.72L.
How much solution are you supposed to use for cleaning?
Using the cap of the solution bottle, fill one cap worth of solution and pour into the Clean Water Tank. Fill up the Clean Water Tank with clean water up to the Max line.
Does the water have to be at a specific temperature for cleaning?
The temperature can be between 41°F ~ 140°F （5°C ~ 60°C). Typically normal tap water is fine to use for cleaning. Please do not use hot water as this can cause internal damage to the pipes in the Floor One.
Where should you store the Floor One?
We advise to store the Floor One on the storage tray that is provided with the Floor One. The storage tray allows the self-cleaning function to work more easily as the tray was designed to fit the head of the Floor One.
Can you adjust the flow of water coming out?
The Floor One will automatically adjust the solution and clean water flow to make sure you have the ideal cleaning experience. You can adjust the water flow to maximum by entering MAX mode when cleaning. This will set the flow to maximum for when you have a tough cleaning situation.
What is the flow rate?
It ranges from 20 to 100ml/min in relation to how dirty the environment is.
What are the max button functions?
The max button enables higher speed and stronger spray to help remove tough spots and stains.
Does the cleaning solution have an odor?
No, the cleaning solution does not have an odor, but it can deodorize the area you are cleaning.
Does this unit suck up animal hair?
The unique brush roll can help to remove animal hair and suck it into the Dirty Water Tank.
Will animal hair get wrapped around roller?
Normally this will not happen because the brush roller diameter size is big enough so it can avoid getting tangled. If there is a tangle, just remove the brush roller from its holder and use the cleaning tool to remove the hair tangle from the brush roller.
Do you have to use distilled water?
There is no need to use distilled water. Tap water is perfectly fine to use in the Floor One. Please do not use hot water as this can cause internal damage to the pipes in the Floor One.
Can I use bleach in the machine to clean floors?
We would not recommend using bleach in this machine as it could damage the machine.
How much does the product weigh?
The product weights about 12.7 lbs.
How long is the warranty?
The warranty lasts 2 years.
How long does the battery last for?
The Floor One S7 Pro can work for 40 minutes on Auto mode. The battery time may vary depending on the environment the Floor One S7 Pro is being used on.
How much area of the house can be cleaned when the bucket is full?
200 square meters
Can I replace the Floor One battery?
The FLOOR One battery is built-in. It can't be detached and replaced.
What is the difference between Floor One S7 and FLOOR One series cleaners?
Floor One S7 has several special features others doesn't have, including Balanced-Pressure Water Flow System, SmoothPower bi-directional propulsion, Dual-sided edge cleaning, Head-lit brush and optimized iLoop Smart sensor.
What does Balanced-Pressure Water Flow System do?
Our patented Balanced-Pressure Water Flow System ensures a completely clean floor with continuous fresh water washing and efficient dirty water recycling, at a constant 450 times/min. Thorough self-cleaning with Balanced-Pressure Water Flow System and a centrifugal drying process stops mold and bacteria.
Why does the Tineco Floor One S7 Stretch Steam battery drain fast in Steam mode?
Steam cleaning consumes significantly more energy than standard wet cleaning because the machine must heat water continuously.
Why does steam take time to start on the Tineco Floor One S7 Stretch Steam?
The machine needs time to heat water to steam temperature, which is normal for cordless steam systems.
Why does the Tineco Floor One S7 Stretch Steam leave streaks in Auto mode?
Auto mode uses less water for everyday cleaning. Sticky messes may clean better in Steam mode.
Why does the Tineco Floor One S7 Stretch Steam struggle with dried stains?
Dried or hardened stains may require multiple passes, especially without continuous steam exposure.
Why is the Tineco Floor One S7 Stretch Steam self-cleaning cycle noisy?
The FlashDry system combines heated washing and hot-air drying, which naturally creates more sound.
Why is the roller still wet after self-cleaning?
The system removes most moisture, but additional air drying helps prevent odor and improves roller lifespan.
Why does the Tineco Floor One S7 Stretch Steam develop odor?
Moisture inside the roller and dirty water tank can create odor if not dried properly after use.
Why can’t the Tineco Floor One S7 Stretch Steam fit under low furniture?
Although the Stretch design allows lay-flat cleaning, the steam module still increases total head height.
Why is the steam function on the Tineco Floor One S7 Stretch Steam not working properly?
Low battery, insufficient heating time, or maintenance issues may affect steam generation.
Why does the Tineco Floor One S7 Stretch Steam require frequent maintenance?
Steam wet-dry vacuums require regular cleaning of tanks, rollers, filters, and the docking station to maintain hygiene and performance.
Why does the Tineco Floor One S7 Stretch Steam feel heavy on stairs?
The steam module, heating system, and water tanks increase overall weight compared with non-steam models.
Why doesn’t the Tineco Floor One S7 Stretch Steam support vacuum-only mode?
The product is designed primarily as a hard-floor wet and steam cleaning system rather than a traditional dry vacuum. (Reddit)
